L3H5 Speleo, 3 x 1100lm – set

L3H5 Speleo- A set of 3 H5 flashlights mounted on a Goodman aluminum holder with an L3 polymer cap.

– No wires.
– 3 independent light sources (safety)
– 3 levels of light output (1100lm/500lm/250lm)
– 5 hours of light at the maximum output when using the flashlights one after another
– Flashlights are equipped with additional lighting functions: flash every 1 second, S.O.S and stroboscope
– Illuminated pushbutton switches
– Perfect balance (the set does not prevail either forward or backward)
– Foldable Goodman handle (folded L3H5 Speleo set fits in a pocket suit pocket)
– Ability to remove 18650 batteries without having to disassemble the handleL3
– Choice of 4 flashlight housing colors. (black, red, pink, blue)

Optics:
Each of the H5 flashlights has 1 pcs. CREE XP-L HI LED, 1100Lm, 6500K, 7°, OP reflector, approximately 100 minutes of light on maximum power.

Body:
The L3H5 is a compact flashlight kit, mounted on a Goodman mount that is great for transport in carry-on luggage. Its weight on the surface including batteries is, 800g (underwater 480g). The shells of the H5 have been hard anodized, making their surface resistant to scratches and abrasion. The back and front parts of the flashlights have been moleskinized to make them easier to unscrew with wet hands.
NOTE: H5 flashlights are equipped with overheat protection. If the temperature of the flashlight body rises dangerously, the light output will be reduced automatically.

Operation:
A push-button switch equipped with a different colored backlight as a battery indicator is used to set the light output and additional light functions.

Switching on:
Quickly press and release the button. The button will illuminate and the flashlight will glow at 100% light output.

Turning off:
Press and hold the button for 2 seconds.

Light brightness control:
When the H5 is on, you can toggle through 3 levels of light brightness by quickly pressing the button:

100% → 50% → 25%

↑———————–↓

Additional light functions:
When the flashlight is off, press and hold the button for 2 seconds. Then, the button will light up and the additional light functions will be activated:

flashes every 1 second → SOS → fast flashes (strobe)

Brightness levels and runtime of one flashlight:

– 100% approximately 100 min

– 50% approximately 190 min

– 25% about 300 min

Button backlight colors – battery level indicators:

100% – 80% – blue
80% – 30% – green
30% – 5% – red
< 5% – red color, blinking.

Equipment:

– Goodman handle with L3 cap.
– 3 pcs. of H5 flashlights
– 2 pcs of double chargers for 18650 batteries (charging time about 8h)
– 3 pcs of HI-MAX 18650, 2600 mAh, PCB rechargeable batteries
– mounting screws
– spare o-rings

You decide – one color set or any mix of colors.